หน้าแรก | ติดต่อเรา | ข่าวสาร | เว็บบอร์ด | เกี่ยวกับเรา | วิธีการชำระเงิน | วิธีการสั่งซื้อ      
            ตั้งเป็นหน้าแรก    เครื่องคิดเลข    แจ้งการชำระเงิน         ไทย | English    
   หมวดหมู่สินค้า
แสดงสินค้าทั้งหมด (4191)
สินค้าขายดี (146)
สินค้ามาใหม่ (158)
Energy
AUTEL ROBOTIC
โปรโมชั่น
01 DJI INNOVATIONS
Gopro Camera
DJI Accessories
Tiger Motors
SEETEC
Feelworld/SeeTec monitor
feiyu-tech
FAT SHARK Goggle
Protect Case กระเป๋า
TAROT Multirotor
FPV Racing
Dragonlink system
Flex Innovations & AJ Aircraft
FMS Model
XFly Model
AV DIGITAL
FPV/UAV Systems
Multirotor & Parts
ManiaX Lipo
Multirotor & Parts
เครื่องบินไฟฟ้า-น้ำมัน Airplane
เฮลิคอปเตอร์ไฟฟ้า-น้ำมัน Helicopter
มอเตอร์ไฟฟ้า Motors
สปีดคอนโทรล - Speed control
วิทยุรับ-ส่ง (Remote Controller)
เครื่องยนต์และอะไหล่ Engine & parts
เซอร์โวและชุดซ่อม
แบตเตอรี่-เครื่องชาร์จ
  - Lipo แบตฯ ลิโพ
  - Ultra Power Charger
  - HOTA Charger
  - Power supply
  - AGA Power
  - Cellpro USA
  - อุปกรณ์สำหรับ เครื่องชาร์จ-แบตเตอรี่
  - เครื่องชาร์จแบตเตอรี่
  - NiCd,NiMh แบตฯ นิแคด,อัลคาไลน์
  - A123 แบตฯ A123
  - BattOn Lipo
ไจโร,BEC & Governer
น้ำมัน-ไนโตร
เครื่องมือ-เครื่องวัด
โปรแกรมฝึกบิน
ใบพัดเครื่องบิน Propeler
เบลดเฮลิคอปเตอร์ Heli Blade
อุปกรณ์ประกอบ-อี่นๆ
อะไหล่-ชุดแต่ง Trex
อะไหล่ Copter X
อะไหล่-ชุดแต่ง เฮลิคอปเตอร์ไฟฟ้า
อะไหล่เฮลิคอปเตอร์น้ำมัน
รถยนต์-มอเตอร์ไซค์
สินค้าลดราคา
Speed Airboat
หนังสือ
เทป+กาว
สินค้าฝากขาย
Drone mini
   สมาชิก
อีเมล์ : 
รหัสผ่าน : 
 
 สมัครสมาชิก
 ลืมรหัสผ่าน
   เว็บเพื่อนบ้าน
RC Thai
Bangkokdomain


ร้านบูรพาทอย
ทางใหม่ซอฟ
DJI-Innovations
กระเป๋าสำหรับ DJI Avata มีหลายแบบ คลิกเลย


 
รหัสสินค้า : PL6_EC5
Cellpro PowerLab 6 with EC5 input cable, 1000W, Multichemistry Battery Workstation 
ราคา ฿5,900.00   หยิบใส่ตะกร้า

เครื่องชาร์จแบตเตอรี่ Cellpro PowerLab 6 คุณภาพสูงจาก USA
ให้กำลังไฟถึง 1000W ชาร์จแบตฯได้สูงสุดถึง 40A. และ dischargeได้สูงสุดถึง 8A

ชุดนี้มีเฉพาะเครื่องชาร์จ สามารถจัดหาสายชาร์จแบต และสายชาร์จบาลานซ์ได้ ตัวเครื่องชาร์จสามารถต่อพ่วงแบตได้ถึง 9 pack จัดหาสายชาร์ตบาลานซ์ต่อพ่วงได้

ดาวน์โหลดคู่มือได้ ที่นี่

For Battery types: Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)

Pack capacity: 20 mAh to 360Ah

Input voltage: 10-32VDC, reverse polarity protected

Input current: 1A to 40A, software limited

Power conversion: Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current

Output battery charge current: Adjustable range 10mA to 40A, limited by 40A input current*

Output battery discharge current: Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**

Continuous max output power: 408W @ +12VDC input, 1000W @ +30VDC

Cell balancing: Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging

Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV

Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA

Measurement accuracy:
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 5% (with accurate fuel table defined for battery being charged)

Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity

Data integrity: Checksum, CRC checking

Cooling fans: Single, 13 CFM, 50mm diameter

Heat sink: Internal 120W aluminum, thin finned

Output battery connector: “Cellpro” compatible, JST PA series, 9 position

LCD: 2 line, 16 character, light grey/blue backlit

Size: 5.70" x 5.57" x 3.40"

Footnotes:

* Please note, for safety reasons, available charger current may be limited for certain battery types and/or charging modes, e.g., non-balanced charge of Li

** Please check bullet number 9 in the section titled “Major Features” (Features tab) for a detailed description of Regenerative Discharge

 

ALL NEW! 1000W Battery Workstation including an EC5 input cable, will charge, discharge, monitor, or multiple cycle any current or future battery chemistry. POWER you have been waiting for, safety you have come to expect in a compact, affordable Cellpro product. Welcome to the new class of R/C battery management. Built on the amazing PowerLab 8 technology, designed from the ground up for reliable high power, geared toward the power user but simple to operate and affordable enough for the masses. The extensive list of features and capabilities are rivaled only by the goal to provide the ultimate in flexibility and utility. Out of the box, the PL6 will run circles around the competition in terms of simple, yet powerful set up and operation. But if you are the type of person looking for the utmost in flexibility and performance, look no further. The PL6, in combination with the Charge Control Software offer virtually unlimited access to charging parameters. Inside the Windows environment, it's easy to alter up to 100 settings for any of the 25 user presets, gain access to 50 additional library presets in the unit or tap into the PC library. Major features include Advanced Power Management to help you set up and use existing Power Supplies or Pb input batteries, faster individual cell IR readout, support for all new Safe Parallel Adapters (PL6 and PL8 share the same adapters) which enable charging/discharging multiple packs simultaneously, Expansion Channel Mode for turning multiple PL6's into one workstation, regenerative discharge with input power supply protection built in. The new PowerLab 6 with EC5-equipped input cable includes a one foot long, 12AWG input wire terminating with an EC5, female pin connector. Revolectrix also has an available 2 foot long plier clip assembly to support quick inter-connect to the input power source. The available cable has the mating EC5 male pin connector-to-plier clips for connecting to a car battery or power supply. Look for this accessory further down on the store page of the web site.Click here to view product specifications and download Charge Control Software to your PC.

 

[541118]


:: เข้าชม 29663 :: ข้อมูลล่าสุด 27/08/2559 ::กลับ  |  ขึ้นด้านบน  |   ส่งให้เพื่อน   
ร้านทวินโปร ฮ้อบบี้ จำหน่ายเครื่องบินบังคับวิทยุ, เฮลิคอปเตอร์บังคับวิทยุ และอุปกร์ RC ทุกชนิด   You are visitor no. 35,015,457  ออนไลน์ : 21
E-commerce Solutions by BangkokDomain.com   ®