หน้าแรก | ติดต่อเรา | ข่าวสาร | เว็บบอร์ด | เกี่ยวกับเรา | วิธีการชำระเงิน | วิธีการสั่งซื้อ      
            ตั้งเป็นหน้าแรก    เครื่องคิดเลข    แจ้งการชำระเงิน         ไทย | English    
   หมวดหมู่สินค้า
แสดงสินค้าทั้งหมด (4191)
สินค้าขายดี (146)
สินค้ามาใหม่ (158)
Energy
AUTEL ROBOTIC
โปรโมชั่น
01 DJI INNOVATIONS
Gopro Camera
DJI Accessories
Tiger Motors
SEETEC
Feelworld/SeeTec monitor
feiyu-tech
FAT SHARK Goggle
Protect Case กระเป๋า
TAROT Multirotor
FPV Racing
Dragonlink system
Flex Innovations & AJ Aircraft
FMS Model
XFly Model
AV DIGITAL
FPV/UAV Systems
Multirotor & Parts
ManiaX Lipo
Multirotor & Parts
เครื่องบินไฟฟ้า-น้ำมัน Airplane
เฮลิคอปเตอร์ไฟฟ้า-น้ำมัน Helicopter
  - บอดี้สเกล
  - เฮลิคอปเตอร์ไฟฟ้า
  - เฮลิคอปเตอร์ไฟฟ้าชุดพร้อมบิน
  - เฮลิคอปเตอร์น้ำมัน
  - Multirotor Copter
  - Micro Helicopter & parts
มอเตอร์ไฟฟ้า Motors
สปีดคอนโทรล - Speed control
วิทยุรับ-ส่ง (Remote Controller)
เครื่องยนต์และอะไหล่ Engine & parts
เซอร์โวและชุดซ่อม
แบตเตอรี่-เครื่องชาร์จ
ไจโร,BEC & Governer
น้ำมัน-ไนโตร
เครื่องมือ-เครื่องวัด
โปรแกรมฝึกบิน
ใบพัดเครื่องบิน Propeler
เบลดเฮลิคอปเตอร์ Heli Blade
อุปกรณ์ประกอบ-อี่นๆ
อะไหล่-ชุดแต่ง Trex
อะไหล่ Copter X
อะไหล่-ชุดแต่ง เฮลิคอปเตอร์ไฟฟ้า
อะไหล่เฮลิคอปเตอร์น้ำมัน
รถยนต์-มอเตอร์ไซค์
สินค้าลดราคา
Speed Airboat
หนังสือ
เทป+กาว
สินค้าฝากขาย
Drone mini
   สมาชิก
อีเมล์ : 
รหัสผ่าน : 
 
 สมัครสมาชิก
 ลืมรหัสผ่าน
   เว็บเพื่อนบ้าน
RC Thai
Bangkokdomain


ร้านบูรพาทอย
ทางใหม่ซอฟ
DJI-Innovations
กระเป๋าสำหรับ DJI Avata มีหลายแบบ คลิกเลย


 
รหัสสินค้า : KX016016
T-REX 600E PRO Super Combo KX016016
สถานะสินค้า : สินค้าพร้อมส่ง
ราคา ฿25,800.00   หยิบใส่ตะกร้า

ในชุดประกอบด้วย

ตัวลำพร้อมเบลดคาร์บอนไฟเบอร์ Frame เป็นคาร์บอน ระบบ Flybar
ระบบขับหลังเป็นเพลา ทำให้แม่นยำและประหยัดพลังงาน
มอเตอร์ 600mx 510KV
เซอร์โวยกพิทและเซอร์โวกันหาง Digital
สปีดคอนโทรล Castle ICE80HV

อุปกรณ์ที่ให้มาเกือบครบแล้วเพียงแค่จัดหา
แบตเตอรี่ แนะนำขนาด 3300 mA6S 2 ก้อน
ชุดวิทยุมาก็จะประกอบบินได้เลย

Focus Shot1(Newly designed main rotor head assembly ) Focus Shot2(Top mounted motor base and imbedded servo mounts ) Focus Shot3(Sliding battery tray rails imbedded into 3K sideframe)
Focus Shot4(CNC slant thread main drive gear set ) Focus Shot5(Precision CNC machined aluminum pieces including rudder servo mount ) Focus Shot6(Rudder servo mount imbeded into 3K sideframe)
Focus Shot7(New lightweight H-cross section for electronic equipments) Focus Shot8(Brand new carbon tail control pushrod assembly ) Focus Shot9(High efficiency shaft tail drive system)
Focus Shot10(Metal tail control arm with wearproof sleeve) Focus Shot11(600MX 510KV Brushless Motor) Focus Shot12(DS610 standard servo)
Focus Shot13(DS650 servo,GP780 gyro) Focus Shot14(600D Carbon fiber blades) Focus Shot15(Castle ICE HV 80 Brushless ESC)
Package1:
Package2:

Specification(T-REX 600E PRO) :

Specification(T-REX 600E PRO) :

●Features
1.Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas and numerous Bell & Hiller mixing ratios. The head can be tuned for superior stability suitable in F3C competition, or lightening fast agility for 3D aerobatic exhibition.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Heatsink embedded into motor mount for effective cooling of motor.
5.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
6.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
7.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
8.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
11.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries
12.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
13.Ergonomically designed H-shaped electronic mount to provide flexible organization or equipment, and minimize wire clutter.
14.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
15.Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
16.Tail pitch mechanism equipped with high precision bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of gravity.
19.High quality painted fiberglass canopy with 4-point quick release mounts.


Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

● Length: 1160mm
● Height: 353mm
● Width: 210mm
● Main Blade Length: 600mm
● Main Rotor Diameter: 1347mm
● Tail Rotor Diameter: 260mm
● Motor Drive Gear:13T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:8.61:3.85
● Weight(With Motor): 2350g

Accessories:
●T-REX 600E PRO Kits Set X1
●Aluminum Tail Boom X1
●600D Carbon fiber blades X1
●600MX Brushless Motor(510KV) X1
●DS610 Digital servoX3
●DS650 Digital servo X1
●GP780 Head Lock Gyro X1
●Castle ICE HV 80 Brushless ESC X1
●6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
●105mm 3K Carbon Fiber Tail Blades X1 Set


Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
●Dial Pitch Gauge

http://www.align.com.tw/shop/product_info.php?cPath=22_25&products_id=3788

[541012]


:: เข้าชม 13594 :: ข้อมูลล่าสุด 28/11/2556 ::กลับ  |  ขึ้นด้านบน  |   ส่งให้เพื่อน   
ร้านทวินโปร ฮ้อบบี้ จำหน่ายเครื่องบินบังคับวิทยุ, เฮลิคอปเตอร์บังคับวิทยุ และอุปกร์ RC ทุกชนิด   You are visitor no. 35,018,689  ออนไลน์ : 27
E-commerce Solutions by BangkokDomain.com   ®